Header Ads

How To Extend/Boost The Range Of Wavlink Router WiFi Signal

 There are many ways by which you will easily boost up the range of the Wavlink router WiFi signal. If you are interested in boosting the Wavlink router signal range then follow the lower methods. Now, let’s jump into the process. 

Change Wavlink Router Placement

Locate both the modem and router gadget in the central location of your house and office. Make sure that your modem and router device does not locate near the metal appliances such as refrigerators, cordless phones, etc. These all types of gadgets absorb the WiFi signal which comes from the router device. 

Change WiFi Channels 

The 2.4GHz frequency band covers a large area but does not provide you with a fast speed on the internet. On the other hand, the 5GHz frequency band provides a faster speed than the previous band but it does not cover a large area. Now, it depends on you which frequency band you will pick and fill your all needs. 

After trying the above two methods, if you fail to extend the range of the Wavlink router WiFi signal then try another method. 

Acquire Wavlink WiFi Range Extender 

Wavlink extender device helps to extend the range of the router WiFi signal. The installation process of the Wavlink range extender is so easy and simple. Read all the lower instructions to know all the basic knowledge about the Wavlink range extender device. 

List Of Top Wavlink Range Extender In 2023

  • AC1200 Wavlink WiFi range extender. 

  • AC600 Wavlink extender. 

  • 2.4G N300 Wavlink range extender. 

How To Configure Wavlink Range Extender 

  • Initially, you need an SSID and security password for the existing router. 

  • Now, settle the Wavlink range extender power plug-in and electrical socket. 

  • After that, launch any type of navigation such as chrome, safari, etc. 

  • Next, enter the default web portal wifi.wavlink.com in the HTML bar. 

  • Further, login into them by entering the admin password, and the gadget scans the available WiFi network. From there, pick up your main WiFi network. 

  • In the end, consider all the instructions which are shown on the display page, by doing that you will successfully do the Wavlink WiFi range extender setup

By WPS Button- Pair Extender To Router 

This is a very simple method to link the extender to the router, but make sure your host router must support the WPS button. If your router does not support WPS button them to change the old router to the new router 

  • To begin with, locate the Wavlink extender power plug into a wall socket. 

  • Now, push your host router's WiFi-protected system button. 

  • Next, inside in two minutes press your Wavlink extender WiFi-protected system button. 

  • Further, verify all the extenders and router LEDs. If they blink solid then it means your extender device is successfully linked with the host router. 

By doing the Wavlink extender setup is done by WPS methods for that user whose existing router supports the WPS button. 

By Network Cable- Attach Wavlink Extender To Host Router 

  • Attach an ethernet cable that comes with your extender to the ethernet port of the router. Prior to doing the configuration of an extender your computer connects to the router with the help of a cable.

  • Join the remaining end of the cable to the Wavlink extender ethernet port.

  • After that, connect your extender to the socket.

  • Now put the plug of the router into the wall outlet.

  • Wait for a few minutes to become a solid LED light for the extender and router. 

  • Hence, they both connect with each other.

Note: After the setup, if you want to change any settings of the Wavlink range extender device then you will need to visit the Wavlink extender login page. 

Resolve Wavlink WiFi Range Extender Issues

Follow the lower two methods to fix the Wavlink range extender issues. 

Improve Wavlink Extender Software:

  • First, visit the Wavlink extender login page. 

  • After that, you will need to look for an administration option and then for the software upgrade. 

  • Now, download that file on your laptop or computer. 

Reset Wavlink Range Extender Gadget 

  • First, take a hairpin. 

  • After that, you will need to insert the paper clip, at the back side of the Wavlink extender reset hole button. 

  • Make sure to only push the reset button for 8 to 10 seconds. 

  • Now, all the Wavlink WiFi range extender LEDs will turn off. 

  • As a result, your extender device is now reset. 

Note: After the reset of the Wavlink extender device, you will need to do the Wavlink extender setup again. 

With the assistance of this article, you will learn the few ways by which you can extend the range of your existing WiFi signal range and we will also help in Wavlink AC1200 setup.

No comments